- #SONOS ARC WALL MOUNT DRIVERS#
- #SONOS ARC WALL MOUNT FULL#
- #SONOS ARC WALL MOUNT CODE#
Where the sound (primarily the base as I understand it) will be less. Where the Arc will sense it’s mounted to the wall via a magnet built-in into the Sonos wall mount. Then I found some information about the sound being changed if you mount it to the wall using the original Sonos wall mount for the Arc. Currently having craftsmen doing some work before I can move in.įirst, I planned to have the Arc standing on a media bench but then I started thinking if I maybe should mount it on the wall instead.
Tilt Mount added feature – Normally when you tilt the display any directly mounted soundbar would also tilt at that same angle.I’m new to Sonos and very much looking forward to try out my Sub Gen 3 and my Arc once my new place is finished. NLA recommends using the forward/depth adjustment so that where the speaker grille on the top of the ARC ends fully clears the front edge of the display. Does not engage the magnet on the back of the Sonos Arc as the installation is not mounted to the wall. #SONOS ARC WALL MOUNT DRIVERS#
Don’t block the Atmos drivers – Engage the forward/depth adjustment options to ensure that the ATMOS drivers/microphones remain unobstructed as the backs of the embedded Atmos drivers end about 2.75″ from the front of the Arc. 
#SONOS ARC WALL MOUNT FULL#
Provides full Height, Forward/Depth, and Tilt adjustment without having to change the main brackets mounted position on the back of the display.
Mounts the Sonos® Arc directly to the display.Because the UM-1 has tilt adjustment, even though the display is tilted downwards the UM-1 allows the installer to re-level the Sonos® Arc so that the Atmos drivers fire upwards (20 degrees) from a level plane Mounting your TV and Arc to a tilt mount, no problem! Normally when you tilt the display any directly mounted soundbar would also tilt at that same angle.
#SONOS ARC WALL MOUNT CODE#
Hide the Power Cord – Unlike an on-wall mount that requires a cord cover to hide the power cord due to electrical code restrictions, the UM1-A allows the power cord to stay hidden when running from the Sonos Arc to behind the display. Engaging the magnet would make the Sonos Arc think that it was mounted to the wall changing its performance, which in this case the Sonos Arc is not mounted to the wall when using the UM1-A Doesn’t Engage the Sonos Arc Magnet– Since this is considered an “off-the-wall” mounting solution you do not want to engage the magnet on the back of the Sonos Arc. Change the Atmos Angle – Change the angle of the Atmos drivers using the tilt adjustment so you can dial in the Atmos effect based upon seating location. Best practice: ensure at a minimum that where the grille ends on the top of the Arc clears the front of the display A minimum of 2.75″ is required as the back of the embedded Arc Atmos drivers ends 2.75″ from the front of the ARC. Unobstructed Atmos – Use the forward/depth adjustment feature to position the Arc at least 2.75″ in front of the display. Snug Fit – Independent height adjustment allows for a snug fit to the bottom of the display. 
***Requires a minimum of 2.75″ from the back of the TV to the wall without the use of spacers in order to avoid the bracket hitting the wall*** ** Supports 300mm to 600mm Display Vesa ONLY** The UM1-A provides direct Height, Forward/Depth, and Tilt adjustment to the Sonos® Arc itself ensuring that the Atmos drivers remain unobstructed.
0 kommentar(er)
